Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Digital Matter Site
  • Contact Us

The Asset Analogue Report

Written by Matthew Clark-Massera

Updated at May 3rd, 2024

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Contact Support
  • Home
  • Telematics Guru
  • Reports

Our devices make use of Analogues to store various values.

All devices use the following 4 analogues:

  • Analogue 1 - Battery Voltage (internal back up battery for hard-wired devices, or the primary cells for battery powered devices)
  • Analogue 2 - External Voltage (hard wired units)
  • Analogue 3 - Internal Temp
  • Analogue 4 - Cellular Signal CSQ (Strength)

Some devices also use

  • Analogue 5 - Loaded battery voltage
  • Analogue 6 - Battery % (Oyster2, Remora2, Eagle, Falcon)

Finally, some devices have interfaces for connecting external sensors. These are configured in the OEM Server interface, and 'mapped' to a specific analogue (generally the higher ones). For example we might see a tank level reading in Analogue 8. 

See Supported Sensors and Inputs for a list of sensors (many others can be supported as well). 

The Asset Analogue Value Report can give us a snapshot across all our assets of the current value of one of the analogues. So we might run it to show things like

  • Show me all assets with a battery voltage below 4.8V (to assist with battery management and changes) 
  • Current Tank Level of all assets, or all assets below 50% (that need attention)
  • Current temperature

To run the report, head to the reports page, and configure the report. For example, to see all devices with a battery life below 4.8V:

The output will show ALL device analogues - and attempt to provide the contextual names if they are set up under the asset I/O mappings. Note this may be incorrect if different devices have different Analogue Mappings (i.e. Analogue 8 might be different things on different units, but they will display in the same column)

resource analysis analog report asset analogue report

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • Exporting Telematics Guru Data
  • Area Coverage Reports
  • Finding Iridium IMEIs vs Device Serials
  • Customize Reports

Subscribe to Partner News

Subscribe to our mailing list to receive Digital Matter news, product and tehnical updates, and more.

Subscribe

Copyright © Digital Matter . All Rights Reserved.

Privacy Contact Support

Knowledge Base Software powered by Helpjuice

Expand