Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Digital Matter Site
  • Contact Us

Ignition

An Enabling System Parameter

Written by Jake Tannenbaum

Updated at January 2nd, 2025

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Contact Support
  • Home
  • Device Manager (OEM Server)
  • Device Features

Table of Contents

Why Change Ignition? Tab Layout Available Parameters Next Steps

Why Change Ignition?

Digital Matter hardwired devices come with a wiring harness and a specific wire (usually white) which can be connected to the ignition line of a vehicle to record trips and usage. However, this wire can be reprogrammed to behave just like any other digital input if the need arises with the Ignition tab. With the exception of the Bias Resistor setting, the Ignition tab is identical to the Digital Input series of tabs in giving freedom to customize the function of your device.

Tab Layout

Available Parameters

Parameter Name Explanation
Function The default value of Digital Input simply allows the wire to feed digital values to the device. Changing this to Pulse Counter will instead record the number of pulses experienced through the wire. See Configuring Pulse Counting for more information.
Digital Input If changed to anything other than Ignition (0), this will report information as the selected Digital Input number in the payload when logging.
Active Level Allows you to change whether the signal detected by the wire should be considered active when it reads 0 or 1.
Log/Upload on Active Logging is the act of creating a record in a standard payload format, and uploading is the act of sending that information to the server. Many logs can be sent with a single upload. If you want a record to be logged or uploaded whenever the state of the wire changes to your “active” state (defined in Active Level) then change this to Yes.
Log/Upload on Inactive Logging is the act of creating a record in a standard payload format, and uploading is the act of sending that information to the server. Many logs can be sent with a single upload. If you want a record to be logged or uploaded whenever the state of the wire changes to your “inactive” state (defined in Active Level) then change this to Yes.
Buzz on Active Count/Period These two are a pair. When Buzz on Active Count is set to anything but zero, that number of buzzes will occur whenever the state changes to whatever you have defined in Active State. Furthermore, the duration of those buzzes is defined in Buzz on Active Period.
Buzz on Inactive Count/Period These two are a pair. When Buzz on Inactive Count is set to anything but zero, that number of buzzes will occur whenever the state changes to whatever you have defined in Active State. Furthermore, the duration of those buzzes is defined in Buzz on Inactive Period.
Emergency Uploads If connecting the ignition wire to a panic button, this will treat any triggers for an upload (defined in other parameters above) as special emergency uploads even when in a No Comms Zone.
Config1 Optionally allows you to change the debounce time if being used as a Digital Input or the Analog to map the total count to if Function was set to Pulse Counter. Please note, if using Digital Input, the number in this field must stay on continuously for 1000ms (1 second) for the device to register it as 1 and send an update to the server.

 

Next Steps

If you want even more inputs to configure, explore the other Digital Inputs on your device.

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • Analog Threshold Parameters
  • Battery Voltage (Advanced)
  • Battery Charging (Advanced)
  • SMS (Adv)
  • Time Zone and Daylight Savings Setup

Subscribe to Partner News

Subscribe to our mailing list to receive Digital Matter news, product and tehnical updates, and more.

Subscribe

Copyright © Digital Matter . All Rights Reserved.

Privacy Contact Support

Knowledge Base Software powered by Helpjuice

Expand