Subscribe to our technical newsletter to be notified of bug fixes and firmware updates.
Device Firmware Release Notes:
| Firmware Version |
Notes |
| V1.7 |
- Enforce flight detection mechanism with an unlockable override
- Support for async stats reset to reset the battery status flags
- Add only fresh GPS and WiFi data to location records
- Add a threshold to the barometer to determine when the setpoint should recalibrate
- Add a parameter to disable scanning location after the BLE scan
- Added emergency upload control for empty and populated BLE taglists.
- Support for applying BLE Mac Filters up to 8 other tag types.
- Use accelerometer FSM for High G detection
- Increase startup upload timeout
- Add a parameter to optionally disable the PCB debug interface. Requires power-on reset.
|
| v1.6 |
- Optionally log regular pressure readings
- Reduce time required for WiFi scans
- Support for location multiplier on heartbeats
- Allow High-G event logging up to 16G
- Prevent re-logging of outdated WiFi data
- Ensure that GSM-only network config does not default
- Configure custom 'battery good' flag threshold in system params
|
| v1.5 |
- Support logging multiple tag lists in a single scan
|
| v1.4 |
- Support for both GPS and WiFi location acquisition
- Introduction of the ground mode service
- Disable modem hardware flow control bypass
- Correct accelerometer wake threshold scaling
|
| v1.3 |
-
Support BLE tag scanning
Support pressure monitoring using the barometer
|
| v1.2 |
- Prevent High G service from triggering falsely
- Support BLE firmware updates
|
| v1.1 |
- Support for the M95P32 flash
|
| v.1.0 |
- First release on preproduction prototypes
|
Bluetooth Firmware Release notes:
| Firmware Version |
Notes |
| v1.4 [Beta] |
TBC |
| v1.3 [Beta] |
TBC |
| v1.2 |
TBC |
| v1.1 |
TBC |
