Exporting Telematics Guru Data
Written by Matthew Clark-Massera
Updated at September 30th, 2026
Table of Contents
Some users may wish to make use of device data stored in Telematics Guru in other systems. Telematics Guru offers some data export functionality.
If data is required in another system on a regular basis, these options should be used instead:
- Multi-Connector: Send the data to TG + another platform simultaneously.
- Alert Notifications through WebHooks (Beta) - on an event (e.g. trip end) - send some pieces of information via HTTP POST to another platform - like current odo, trip distance, current position etc.
TG Data Export Reports
Report |
# Assets |
Date Range |
Information |
| Basic Device Data Export | 1 | Max 7 Days | Simplified telemetry view - Datetime - Lat/Long - Ignition Status - Speed - Driver ID Data, Project, Trip Type |
| Device Data Export | 1 | Max 10 Days | Provides an export of the telemetry seen in Assets -> Telemetry |
| Device Data IO Telemetry Export | 1 | Max 5000 records | Exports up to 5000 records Date time, log reason + all I/Os set up against the asset under I/O Mappings |
| Device Data Telemetry Export | 1 | 1 day | Exports the raw data seen in Assets -> Telemetry for a single asset on a single day |
Telemetry Export (All Assets, All Data)
Some users may wish to export in bulk all telemetry data. For reasons such as:
- Conducting detailed analysis elsewhere to Telematics Guru
- To store the data themselves for compliance reasons
Compared to the data exports above, which only allow users to download raw telemetry data for a limited number of assets and/or limited date range, the Telemetry Export facilitates export of all asset data for an organisation.
In order to set up an Export, the TelemetryExportSetup Permission is required.
If you do not have this permission - Digital Matter Support will be able to enable it for your account.
To run a Telemetry Export,
Go to Reports → Telemetry Export → New.
Click Generate
Once this is done, the report is queued for an off-peak time (overnight per region). So in general, it will be ready the next morning.
The user which ran the report will receive an email notification that the report is ready to download once it has run. This email contains a link to the Telemetry Export TG view where they can download the report.
Once the telemetry export is generated, you can download it from the grid in TG. The Report will be downloaded as a CSV file and will only be available for one month from the time they're made available.
The Telemetry Export view can be navigated to without having received the email in order to check the status of any exports and also any historical reports.
